Ensons Gages & Tools Pvt Ltd

V’ Blocks are required for Quality Control, Tool Room and Standard Room.  Magnetic 'V’ Blocks have high magnetic pull, hence they can be used fro drilling and grinding (both wet and dry) and even for light milling work.

The 'V’ Block has a total three magnetic surfaces. Top and Bottom with 90 'V’ angle and end surface opposite to switch. All three magnetic surfaces and the two sides are carefully ground. Their accuracy for flatness, parallelism and squareness is within 0.005 mm for 2", 3", 4" & 6" 'V’ Blocks. When turned "ON" all three magnetic surfaces are activated Simultaneously.

The permanent magnet holds the work firmly in the 'V’ and if the block rests on a magnetically conductive surface, it is held firmly to this surface. The magnetic pull is constant and will not decrease eveb after long use. The magnetic system being shielded from penetration of moisture, cannot be damaged by coolants or other fluids.

Features:

• ‘V’ Blocks are hardened and ground to 55 ± 2 HRC.
• Precision ‘V’ Blocks for Tool Room,Inspection, Work, Assembly Shop.
• All sides precision ground, parallel and square within ± 5 microns.
• Supplied with clamp for holding job.

Request

Magnetic 'V' Block with Two Vee.
on off switch 
for round and irregualr shapes 
100 x 100 x 100 MM
150 x 150 x 150 MM 
L           H     W 

Additional Information:

• Item Code: aa-193

We are a company which is well known in the market for the manufacture and supply of a wide range of products which are available in a range of designs and they are available in different shapes and sizes and are used for a wide range of applications.

We are a company which is well known in the market for the manufacture and supply of a wide range of products which are available in a range of designs and they are available in different shapes and sizes and are used for a wide range of applications.

• Made from single piece of fully seasoned, fine quality steel.
• Squares having accurate right angles both inside & outside.
• Beams & Blades are accurately lapped for straightness & parallelism.
• All squares are fully hardened to 58 (+-2) Rc.
• Beam is grooved at inner corner for clearance of bums & dirt

We are a company which is well known in the market for the manufacture and supply of a wide range of products which are available in a range of designs and they are available in different shapes and sizes and are used for a wide range of applications.

We are a company which is well known in the market for the manufacture and supply of a wide range of products which are available in a range of designs and they are available in different shapes and sizes and are used for a wide range of applications.

We are a company which is well known in the market for the manufacture and supply of a wide range of products which are available in a range of designs and they are available in different shapes and sizes and are used for a wide range of applications.

We are a company which is well known in the market for the manufacture and supply of a wide range of products which are available in a range of designs and they are available in different shapes and sizes and are used for a wide range of applications.

We are a company which is well known in the market for the manufacture and supply of a wide range of products which are available in a range of designs and they are available in different shapes and sizes and are used for a wide range of applications.

With state-of-the-art infrastructure facilities, we are engaged in offering a large gamut of Steel Straight Edge. These edges are made in such a manner that they match industry standards and norms. Moreover, these edges are offered after stern quality checks that are conducted by our highly experienced and immensely skilled quality controllers. Our exclusive range is accredited for their high strength and dimensional accuracy.

 

Features:

 

• Various sizes
• High tensile strength
• Corrosion resistance

Additional Information:

• Item Code: AA-290

These are three-point internal micrometers that offer you the following benefits:

• Individual micrometer.
• durability and impact resistance.
• They also have excellent
  resistance against water and dust (IP65 protection level), allowing you to use this product in machining situations that include splashing coolant fluid.
• Large LCD display with character height of 7,5 mm enables you to read measurements easily.
• Without setting rings or extensions.

Magnetic ''V'' Block: Accuracy for Squareness, Flatness & Parallelism within 5 micron.

Additional Information:

• Item Code: AA-180

Being a client-centric organization, we are indulged in manufacturing, supplying and trading Magnetic Rectangular Blocks. These blocks are broadly used in different industry applications. Owing to their unmatched quality and set industry norms, these blocks are extensively demanded and praised among the clients across the nation and worldwide.

 

Features:

• Engineer designed
• On-time delivery
• Quality checked

Additional Information:

• Item Code: AA-193

Features:

• ‘V’ Blocks are hardened and ground to 55 ± 2 HRC.
• Precision ‘V’ Blocks for Tool Room,Inspection, Work, Assembly Shop.
• All sides precision ground, parallel and square within ± 5 microns.
• Supplied with clamp for holding job.

We design Hardened & Ground Chrome Plated Shaft to meet your specific needs for piston rod material in hydraulic and pneumatic cylinders and other applications. We also offer customized facility for these as per the specifications of our clients. We offer the products after testing them on various parameters of performance, size and strength by using high quality testing equipment. 

 

Features:

 

• Highly durable quality
• Feasible price
• Robust

Additional Information:

• Item Code: AA-271

With years of experience, we are able to manufacture and supply a large variety of V Type Transfer Blocks. Under the leadership and assistance of our experts, we have developed our range using optimum grade raw materials and latest technology methods. Apart from this, our range is accredited for its high durability, reliability, optimum strength, accurate dimensions and longevity.
 
Features:
 

High strength

Timely delivery

Best quality 

Additional Information:

• Item Code: AA-156

Two common types of locating pin: plain and shoulder-type. These locating pins come in a wide range of diameters. They are (normally) installed by either press fitting the pin directly into the tool body, or slipping them into a bushing. This second type is retained by a lockscrew.

Additional Information:

• Production Capacity: 5000

An extensive range of Parallel Blocks can also be availed from us, which are designed and developed in adherence with the industry standards and norms. By following international guidelines and set industry parameters, we have made our range through advanced techniques and quality approved raw materials. In order to suit the budgetary limits of the clients, we supply our range at most affordable rates.
 
Features:
 

Accurate dimensions

Stringently checked

Affordable rates 

Additional Information:

• Item Code: AA-120